Description: The SR-22T/1-1 Charging System is designd for the Tornado Alley Turbo Cirrus. The harness can also be used with our Model 28252 charger/power supply with the appropriate plug. The kit consists of an Aviation Specific BatteryMINDer Model 24041-AA-S2 with yellow safety shield andSpec Pak Male Plug. The harness is 73 inches long, consisting of two #10 and, two #20 aircraft grade wires. The power charging wires are terminated at the battery connector in crimp-type, 5/16 inch diameter ring terminals, and on the other end into Spec Pak female socket reptacle installed on the baffle, next to the alternator. The #20 sensor wires are terminated into a thermistor encapsulated inside a 5/16 inch diameter ring terminal on one end, and on the other end into the Spec Pak female socket terminal. The wiring harness is routed inside a braided sleeve, and an in-line fuse holder is installed in series with the "positive" wire near the battery connector ring terminals. Peel-and-stick log book entry is included along with complete installation instructions.