Description: The TBM Charging System consists of an Aviation Specific BatteryMINDer Model 24041-AA-S2 with yellow safety shield and CPC Male Plug. The TBM harness is 72 inches long consisting of two #16 and, two #20 aircraft grade wires. The power charging wires are terminated at the battery connector in crimp-type, 5/16 inch diameter ring terminals, and on the other end into Multimate Series 1, Type III+ female socket terminals, and a CPC, Series 1, four-contact reverse receptacle. The #20 sensor wires are terminated into a thermistor encapsulated inside a 5/16 inch diameter on one end, and on the other end into Multimate Series 1 female socket terminals in the same CPC receptacle described above. The wiring harness is routed inside a braided fiberglass sleeve, and a Nylon in-line fuse holder is installed in series with the "positive" wire near the battery connector ring terminals. Peel-and-stick log book entry is included along with complete installation instructions.